XL-7 Limited 4WD V6-2.7L (2002)
Sunroof / Moonroof Gear Assembly: Service and Repair
Removal and Installation
Sliding Roof Assembly
Removal
1. Remove head lining, referring to "Head Lining Removal and Installation".
2. Remove sliding roof glass, referring to "Sliding Roof Glass Removal and Installation".
3. Disconnect drain hoses (1) connected to sliding roof assembly at 4 locations.
4. Disconnect sliding roof motor assembly (1) at coupler (2).
5. Remove 6 nuts (1) and then remove sliding roof assembly (2).
Installation
For installation, reverse removal procedure, noting the following points.