XL-7 Limited 4WD V6-2.7L (2002)
4. If measured depth is out of specifications, adjust to specifications below by turning adjusting screw of piston rod.
Special tool
(F): 09952-16021
Depth of piston rod for adjustment
"d": 16.3 - 16.6 mm (0.642 - 0.653 inch)
Booster Push Rod Clevis Adjustment
Install push rod clevis (1) so that measurement "a" is obtained and torque nut (2) to specification.
Tightening torque
Clevis nut (a): 25 Nm (2.5 kgf-m, 18.0 ft. lbs.)
Clevis installing position (length "a")
"a": 109.5 - 110.5 mm (4.31 - 4.35 inch)