XL-7 Limited 4WD V6-2.7L (2002)
Cruise Control Servo Cable: Service and Repair
Cruise Cable
Cruise Cable Removal and Installation
Removal
1. Disconnect cruise cable (4) from cruise control arm and accelerator bracket.
2. Remove actuator cap (1) and disconnect cruise cable (4) from actuator assembly (2).
3. Release cable from all clamps.
4. Remove cable from vehicle.
Installation
Install cruise cable (4) by reversing removal procedure. Refer to the figure for proper clamp location and cable routing.
Adjust cruise cable play to specification referring to "Cruise Cable Play Inspection and Adjustment:".
