XL-7 Limited 4WD V6-2.7L (2002)
Refrigerant Control Solenoid Valve: Service and Repair
A/C Solenoid Valve
Removal
1. Remove rear A/C unit referring to "Rear A/C Unit (Rear A/C Evaporator) Removal and Installation:".
2. Disconnect solenoid valve connector (1).
3. Loosen solenoid valve flared nuts (2).
4. Remove solenoid valve bracket mounting screws (3), and then remove rear liquid pipe (4) and rear suction pipe (5) from rear expansion valve.
5. Remove rear liquid pipe (4), rear suction pipe (5) and solenoid valve bracket (6) from solenoid valve (7).
NOTE: Cap open fitting immediately to keep moisture out of system.
Installation
Reverse removal procedure to install solenoid valve.