XL-7 Limited 4WD V6-2.7L (2002)
^
For 4WD vehicle, press-fitting inner oil seal.
Drive in inner oil seal until its end contacts stepped surface of knuckle using special tools.
Special tool
(B): 09944-66010
(C): 09944-66010
^
For 4WD vehicle
-
Apply lithium grease to oil seal lip and into its hollow to fill more than 60% of its vacant space.
-
Apply lithium grease "A" to drive shaft.
"A": Grease 99000-25010
-
Press-fit front drive shaft thrust washer (1) to drive shaft, if it is removed.
"A": Grease 99000-25010
^
For 2WD vehicle, apply water tight sealant "A" to mating surface of knuckle and install knuckle cap (2) to knuckle (1).
"A": Sealant 99000-31090