XL-7 Limited 4WD V6-2.7L (2002)
Front Steering Knuckle: Service and Repair
Knuckle/Wheel Spindle Replacement
Knuckle / Wheel Spindle Removal and Installation
Removal
1. Remove wheel hub component.
2. Remove front drive shaft circlip (1) and front spindle thrust washer (2) (for 4WD vehicle) or front hub cap (for 2WD vehicle).
1. Disconnect tie-rod end (1) from knuckle (2).
2. Remove stabilizer bar.
3. Remove ball stud nut.
4. Support lower arm with jack.
