XL-7 Plus 2WD V6-2.7L (2001)
Brake Caliper: Service and Repair
Removal and Installation
REMOVAL
1. Hoist vehicle and remove wheel.
2. Remove brake flexible hose mounting bolt from caliper. As this will allow fluid to flow out of hose, have a container ready beforehand.
3. Remove caliper pin bolts (1).
4. Remove caliper (2).
INSTALLATION
1. Install caliper carrier
2. Torque caliper pin bolts (1) to specifications
Tightening torque
Caliper pin bolt (a): 50 Nm (5.0 kg-m, 36.5 ft. lbs.)
Caliper pin bolt (b): 85 Nm (8.5 kg-m, 61.5 ft. lbs.)
