XL-7 Plus 2WD V6-2.7L (2001)
Malfunction Indicator Lamp: Testing and Inspection
1. Turn ON ignition switch (but the engine at stop) and check that MIL (1) lights.
If MIL does not light up, go to "Diagnostic Flow Table A-1" for troubleshooting.
2. Start engine and check that MIL turns OFF
3. If MIL remains ON, and no DTC is stored in ECM (PCM), go to "Diagnostic Flow Table A-2" under Computers/Testing/Non-Trouble Code
Procedures for troubleshooting.