XL-7 Plus 2WD V6-2.7L (2001)
2. Install SDM (2) to vehicle.
CAUTION: Ensure that arrow on the SDM is pointing toward the front of the vehicle.
3. Tighten SDM bolts to specified torque.
Tightening torque
SDM bolt (a) : 6 N.m (0.6 kg-m, 4.5 lb ft)
4. Connect SDM connector (1) to SDM (2) securely.
5. Install tuner assembly, clock assembly (5), tuner pocket, radio hole cover (4), etc. and ashtray (3).
6. Install center garnish panel (2).
7. Install front and rear center console box (1).
8. Connect negative cable to battery.
9. Enable air bag system.