XL-7 Plus 2WD V6-2.7L (2001)
2. Connect Yellow connector (1) of contact coil and combination switch assembly, and be sure to lock connector with lock lever.
a. Connect connector.
b. Lock connector with lock lever.
3. Connect Yellow connector (1) of passenger air bag (inflator) module, and be sure to lock connector with lock lever.
a. Connect connector.
b. Lock connector with lock lever.
4. Install glove box.
5. Install "AIR BAG" fuse to "AIR BAG" fuse box.
6. Turn ignition switch to ON and verify that "AIR BAG" warning lamp flashes 6 times and then turns off. If it does not operate as described,
perform "AIR BAG DIAGNOSTIC SYSTEM CHECK".