XL-7 Standard 2WD V6-2.7L (2001)
1. Check that none of following faulty conditions exists.
-
Bend or deformity of sensor bracket (1) and front panel.
-
Foreign matter on mating surface of sensor bracket (1) with sensor or excessive rust.
2. Apply thread lock cement to mounting bolts thread. Install forward sensor (1) on front panel (2) and tighten mounting bolts (3) to specified torque.
"A" : Thread lock cement "1332B" 99000-32100
Tightening torque
(a) : 10 N.m (1.0 kg-m, 7.2 lb-ft)
3. Connect forward sensor connector pushing connector inner (1) as shown.
4. Connect negative cable at battery.
5. Enable air bag system.