XL-7 Standard 2WD V6-2.7L (2001)
Seat Belt: Testing and Inspection
Inspection on Vehicle
Seat belts with ALR
As to seat belts with ALR (other than driver side seat belt), check them as follows in addition to above check.
-
With vehicle at stop, pull seat belt all the way out, let it retract a little and try to pull it. It should not be pulled out, that is, it should be locked
where retracted.
-
Let seat belt retract to its original state. Next, pull it half way out, let it retract a little and try to pull it again. It should be pulled out smoothly, that
is it should not be locked at this time.
