XL-7 Touring 4WD V6-2.7L (2002)
17. Connect accelerator cable (1) and A/T throttle cable (2) (for A/T vehicle) to throttle body.
18. Install surge tank pipe (2) to intake manifold with new gaskets and intake air pipe (1) to throttle body.
19. Install surge tank cover (1).
20. Install air cleaner upper case.
21. Connect coupler to intake air temperature sensor and MAF sensor.
22. Install strut tower bar (1).
23. Check to ensure that all removed parts are back in place.
Reinstall any necessary parts which have not been reinstalled.
24. Refill cooling system.
25. Connect negative cable at battery.
26. Upon completion of installation, verify that there is no fuel leakage at each connection.