XL-7 Touring 4WD V6-2.7L (2002)
3. Install timing chain tensioner adjuster No.2 (1).
Tightening torque
Timing chain tensioner adjuster No.2 bolt (a): 11 Nm (1.1 kgf-m. 8.0 ft. lbs.)
4. Apply oil to sliding surface of each camshafts and camshaft journals.
5. Install RH bank 2nd timing chain by aligning match marks on yellow or silver plates (1) of RH bank 2nd timing chain, RH bank 2nd timing chain
intake camshaft sprocket and RH bank 2nd timing chain exhaust camshaft sprocket as shown in the figure.
6. Install camshaft housing pins (3) as shown in figure.
7. Check position of camshaft housings.
Embossed marks are provided on each camshaft housing, indicating position and direction for installation. Install housings as indicated by these
marks.
