XL-7 Touring 4WD V6-2.7L (2002)
seat belt pretensioner is to be activated.
4. Remove air bag (inflator) module(s) and seat belt pretensioner(s) from vehicle, referring to "Driver Air Bag (Inflator) Module Removal and
Installation" "Passenger Air Bag (Inflator) Module Removal and Installation" and "Front Seat Belt with Pretensioner Removal and Installation".
WARNING:
-
Always carry live air bag (inflator) module with trim cover away from you.
-
When storing a live air bag (inflator) module or when leaving a live air bag (inflator) module unattended on a bench or other surface,
always face the bag and trim cover up and away from the surface. As the live passenger air bag (inflator) module must be placed with
its bag (trim cover) facing up, place it on the workbench with a slit (1) or use the workbench vise (2) to hold it securely at its lower
mounting bracket (3).
This is necessary so that a free space is provided to allow the air bag to expand in the unlikely event of accidental deployment.
Failure to follow procedures may result in personal injury.
WARNING:
-
For handing and storage of a live seat belt pretensioner, select a place where the ambient temperature below 65 °C (150 °F), without
high humidity and away from electric noise.
-
Never carry the seat belt pretensioner by the wire or connector of the pretensioner.
-
When placing a live seat belt pretensioner on the workbench or other surface, be sure not to lay it with its exhaust hole (1) provided
side facing down. It is also prohibited to put something on its face with an exhaust hole (1) or to put a seat belt pretensioner on top of
another.
Otherwise, personal injury may result.
5. Set air bag (inflator) module or seat belt pretensioner as follows.
