XL-7 Touring 4WD V6-2.7L (2002)
Torque Rod: Service and Repair
Upper Rod
Removal
1. Hoist vehicle and remove rear wheel.
2. If equipped with ABS, disconnect wheel speed sensor harness clamp (1) from left upper rod (2).
3. Remove upper rod (1).
Installation
1. Install upper rod to chassis frame and axle housing. Nuts should not be tightened.
NOTE: Use new front and rear bolts ((1), (5)).
2. See figure for distinction of installing direction of left side upper rod for vehicle equipped with ABS.
3. Connect wheel speed sensor harness clamp to upper rod (if equipped with ABS).
