XL-7 Touring 4WD V6-2.7L (2002)
23. Install wheel and tighten wheel nuts to specified torque.
Tightening torque
Wheel nut (a): 100 Nm (10.0 kgf-m, 72.5 ft. lbs.)
24. Upon completion of all jobs, depress brake pedal with about 30 kg (66 lbs) load three to ten times so as to obtain proper drum-to-shoe clearance.
Adjust parking brake cable.
25. Tighten parking brake lever cover screws.
26. Lower hoist.
27. Tighten right and left lower/upper rod nuts, lateral rod bolt and shock absorber lower nuts to specified torque.
NOTE: When tightening these bolts and nuts, be sure that vehicle is off hoist and in non-loaded condition.
Tightening torque
Lateral rod bolt (a): 100 Nm (10.0 kgf-m, 72.5 ft. lbs.)
Lower rod nut (a): 100 Nm (10.0 kgf-m, 72.5 ft. lbs.)
Upper rod nut (a): 100 Nm (10.0 kgf-m, 72.5 ft. lbs.)
Shock absorber lower nut (a): 100 Nm (10.0 kgf-m, 72.5 ft. lbs.)
28. Check to ensure that brake drum is free from dragging and proper braking is obtained.
29. Perform brake test (foot brake and parking brake).
30. Check each installed part for oil leakage.