XL-7 Touring 4WD V6-2.7L (2002)
2. Insert shift shaft (1) as shown in the figure while making sure that inner parts are in proper direction.
NOTE:
^
Cut off portion (3) in shift shaft (1) should face downward when shift shaft (1) is installed.
^
Shift lever (2) should be installed at the same time.
3. Drive in spring pins (2) for gear shift lever (5) and shift arm (7).
NOTE: When driving in spring pins, position their slits 180° ± 30° apart.
Special tool
(A): 09925-78210
4. Apply sealant to new case plug (8) and drive it into lever case (1).
"A": Sealant 99000-31110
