Camry Sedan L4-2.4L (2AZ-FE) (2003)
/Page-326002.png)
11. REMOVE NO.2 CAMSHAFT
a. Fix the camshaft with a wrench and so on, then loosen the camshaft timing gear set bolt.
NOTICE: Be careful not to damage the valve lifter.
b. Loosen the camshaft bearing cap bolts on No.2 camshaft in the sequence shown in the illustration in several passes, and remove the caps.
c. Raising the camshaft, remove the set bolt.
d. Remove the camshaft timing gear from the camshaft with timing chain.
e. Remove the camshaft timing gear from the timing chain.
12. REMOVE CAMSHAFT
a. Loosen the camshaft bearing cap bolts on camshaft in the sequence shown in the illustration in several passes, and remove the caps.
b. Remove the intake camshaft.