Camry Sedan 4-Door L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
HINT: (When re-using timing belt): After loosening the crankshaft pulley bolt, check that the timing belt matchmarks aligns with the end of the
No.1 timing belt cover when the crankshaft pulley groove is aligned with the timing mark "0" of the No.1 timing belt cover. If the matchmarks
does not align, align as follows:
When matchmarks is misaligned clockwise:
-
Align the matchmarks by pulling the timing belt up on the water pump pulley side while turning the crankshaft pulley counterclockwise.
-
After aligning the matchmarks, hold the timing belt. turn the crankshaft pulley clockwise, and align its groove with timing mark "0" of the
No.1 timing belt cover.
When matchmarks is misaligned counterclockwise:
-
Align the matchmarks by pulling the timing belt up on the No.1 idler pulley side while turning the crankshaft pulley clockwise.