Camry Sedan 4-Door L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
b.
Using a torx socket wrench, loosen the torx screws until the groove along the screw circumference catches on the screw case. (See Fig. 1)
c.
Pull the wheel pad away from the steering wheel and disconnect the airbag connector. (See Fig. 2)
CAUTION:
When storing the wheel pad, keep the upper surface of the pad facing up.
Never disassemble the wheel pad.
NOTICE:
When removing the wheel pad, take care not to pull the airbag wiring harness.
4.
Remove the steering wheel.
a.
Disconnect the spiral cable connector.
b.
Remove the wheel set nut.
c.
Place match marks on the wheel and steering main shaft. (See Fig. 3)