Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
/Page-888002.png)
3. REMOVE THRUST WASHER FROM SUN GEAR INPUT DRUM
4. REMOVE SUN GEAR FROM DRUM
a. Using snap ring pliers, remove the snap ring from the drum.
b. Remove the sun gear from the drum.
5. CHECK SUN GEAR BUSHINGS
Using a dial indicator, measure the inside diameter of the sun gear bushings.
Maximum inside diameter: 22.59 mm (0.08894 in.)
If the inside diameter is greater then the maximum, replace the sun gear.
NO.1 ONE-WAY CLUTCH AND SUN GEAR ASSEMBLY
1. INSTALL SUN GEAR TO DRUM