Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
/Page-959002.png)
3.
Remove backing plate from rear axle carrier and position aside using suitable wire.
4.
On models equipped with anti-lock brakes, remove ABS speed sensor from axle carrier and disconnect LSPV spring from lower arm.
5.
On all models, loosen but do not remove three axle carrier attaching nuts, Fig. 8.
6.
Disconnect strut rod from axle carrier.
7.
Remove axle carrier three attaching nuts and bolts, then remove axle carrier.
8.
Reverse procedure to install.