Camry XLE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
Coolant Temperature Sensor / Switch HVAC: Service and Repair
REMOVAL
1. DRAIN ENGINE COOLANT FROM RADIATOR
HINT: It is not necessary to drain out all the coolant.
2. REMOVE ECT SWITCHES
a. Disconnect the connector.
b. Remove the ECT switch.
HINT: At the time of installation, please refer to the following item. Lubricate a new O-ring with soapy water and install the switch.
INSTALLATION
INSTALL ECT SWITCHES
a. Install the ECT switch.
HINT: Lubricate a new O-ring with soapy water and install the switch.
b. Connect the connector.