Camry XLE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
d. Install the rings to the control valve assembly, and settle them down with your fingers.
e. Carefully slide the tapered end of SST over the rings until the rings fit to the steering rack.
SST 09631-20081
NOTICE: Be careful not to damage the rings.
REASSEMBLY
NOTICE: When using a vise, do not overtighten it.
1. COAT WITH POWER STEERING FLUID OR MOLYBDENUM DISULFIDE LITHIUM BASE GREASE
2. INSTALL OIL SEAL
a. Coat a new oil seal lip with power steering fluid.
b. Using Special Service Tool (SST), press in the oil seal.
(SST) 09950-60010 (09951-00240, 09951-00430, 09952-06010), 09950-70010 (09951-07360)
NOTICE:
^
Make sure to install the oil seal facing the correct direction.
^
Take care that the oil seal does not get reversed as you install it.