Celica L4-1.8L (2ZZ-GE) (2005)
^
Figure 17 shows an example of the update procedure for a two-processor ECU.
G. Turn ignition OFF. Then click Next.
H. Confirm the following:
^
Ignition is ON and engine is OFF or "READY" OFF (hybrid vehicles).
^
Hood is open.
^
All accessories are OFF.
^
Battery voltage is above 11.4 volts.
NOTICE
Verify the vehicle is connected to a battery charger before continuing - If battery voltage falls below 11.4 volts, ECU damage may occur.