Celica L4-1.8L (2ZZ-GE) (2005)
Side Airbag Sensor Assembly
REMOVAL
NOTE:
-
If the wiring connector of the SRS is disconnected with the ignition switch at ON position, DTCs will be recorded.
-
Do not open the cover or the case of the ECU and various electrical devices unless absolutely necessary. (If the IC terminals are touched, the IC
may be destroyed by static electricity.)
1. REMOVE PACKAGE TRAY TRIM PANEL
2. REMOVE REAR SEATBACK ASSEMBLY LH AND RH
3. REMOVE REAR SEAT CUSHION ASSEMBLY
4. REMOVE DECK TRIM REAR COVER
5. REMOVE DECK TRIM SIDE COVER