Celica L4-1.8L (2ZZ-GE) (2005)
/Page-709004.png)
9. INSPECT NEGATIVE RECTIFIER HOLDER
a. Using an ohmmeter, connect one tester probe to each negative (-) terminal and the other to each rectifier terminal.
b. Reverse the polarity of the tester probes and repeat step (a).
c. Check that one shows continuity and the other shows no continuity.
If continuity is not as specified, replace the rectifier holder.
10. INSPECT FRONT BEARING
Check that the bearing is not rough or worn.
11. IF NECESSARY, REPLACE FRONT BEARING
a. Remove the 4 screws, bearing retainer and bearing.
b. Using SST and a press, press out the bearing.
SST 09950-60010 (09951-00350) 09950-70010 (09951-07100)