Celica GT Liftback L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
Torque:
54 Nm (550 kgf-cm, 40 ft. lbs.)
37 Nm (380 kgf-cm, 27 ft. lbs.) for SST
HINT: Use a torque wrench with a fulcrum length of 340 mm (13.39 inch).
10. SET NO.1 CYLINDER TO TDC/COMPRESSION
a. Turn the crankshaft pulley, and align its groove with timing mark "0" of the No.1 timing belt cover.
b. Using SST, turn the camshaft, and align the hole of the camshaft timing pulley with the timing mark of the bearing cap.
SST 09960-10010 (09962-01000, 09963-01000)
11. CONNECT TIMING BELT TO CAMSHAFT TIMING PULLEY
HINT: (When re-using timing belt): Check that the matchmark on the timing belt matches portion A of the No.1 timing belt cover.
If the matchmark does not align, shift the meshing of the timing belt and crankshaft timing pulley until they align.
^
Align the matchmarks of the timing belt and camshaft timing pulley.
a. Remove any oil or water on the camshaft timing pulley, and keep it clean.