FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
24. REMOVE REAR SPEAKER ASSEMBLY
a. Remove the clamp, the 2 bolts and the rear speaker.
INSTALLATION
HINT: The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.
1. INSTALL REAR SPEAKER ASSEMBLY
a. Inert the 2 hooks into the 2 cutouts of the speaker mounting bracket and install the rear speaker with the 2 bolts.
Torque: 8.1 N.m (85 kgf.cm, 72 in.lbf)
b. Install the clamp.
2. INSTALL SPEAKER MOUNTING BRACKET
a. Install the speaker mounting bracket with the 2 bolts.
Torque: 8.1 N.m (85 kgf.cm, 72 in.lbf)
b. Connect the speaker connector.
3. INSTALL ROOF SIDE INNER GARNISH
4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY
a. for RH Side:
1. Install the deck trim side panel assembly.
b. for LH Side:
1. Install the deck trim side panel assembly.
5. INSTALL REAR DECK TRIM COVER (w/ Power Outlet Socket)