FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
Applicable Vehicles
^
2007 model year Toyota vehicles.
Warranty Information
Applicable Warranty*:
This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first, from
the vehicle's in-service date.
* Warranty application is limited to correction of a problem based upon a customer's specific complaint.
Required Tools & Material
Repair Procedure
1.
Use the aluminum foil or damp cloth to cover plastic/rubber parts that are near the stain.
2.
Apply heat to the stain using an infrared lamp or heat gun.
NOTE:
Apply heat for 5 - 10 minutes at 158°F - 176°F (70°C - 80°C). Do NOT allow the surface to become hotter than 176°F (80° C). Measure the
temperature with a thermometer.
3.
After applying heat for 5 minutes, examine the area to determine if the stain has been removed. If the stain still exists, continue to apply heat and
re-examine the stain 5 minutes later.