FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
a. Remove the No. 2 fuel pipe clamp.
b. Pinch the tube connector, and then pull the fuel pipe out of the delivery pipe as shown in the illustration.
NOTE:
-
Remove any dirt and foreign objects from the fuel tube connector before performing this work.
-
Do not allow any scratches or foreign objects on the parts when disconnecting, as the fuel tube connector has the O-ring that seals the pipe.
-
Perform this work by hand. Do not use any tools.
-
Do not forcibly bend, twist or turn the nylon tube.
-
Protect the disconnected part by covering it with a vinyl bag after disconnecting the fuel tube.
-
If the fuel tube connector and pipe are stuck, push and pull to release them.
12. DISCONNECT NO. 2 FUEL PIPE SUB-ASSEMBLY
a. Remove the No. 2 fuel pipe clamp.
b. Pinch the tube connector, and then pull the fuel pipe out of the delivery pipe as shown in the illustration.
NOTE:
-
Remove any dirt and foreign objects from the fuel tube connector before performing this work.
-
Do not allow any scratches or foreign objects on the parts when disconnecting, as the fuel tube connector has the O-ring that seals the pipe.