MR2 L4-132 2164cc 2.2L DOHC (5S-FE) (1993)
(e)
Remove the passenger side air duct.
(f)
Remove the blower resistor to allow access for the spray nozzle (insert at bigger arrow).
2.
Cleaning the Evaporator.
^
Follow the general procedures at the beginning of this bulletin.
3.
Reinstallation of parts.
^
Reinstall the parts in the reverse order of removal described in step 1.
CAUTION:
Make sure that the three guides of glove box are Inserted back into the three holes as shown in the Illustration.
CAUTION:
Take care not to pinch the Air Bag Harness when reinstalling the glove box.