MR2 L4-132 2164cc 2.2L DOHC (5S-FE) (1993)
Throttle Position Sensor: Adjustments
1.
Remove throttle body, refer to FUEL SUPPLY AND AIR INDUCTION.
2.
Loosen TPS mounting screws.
TPS Adjustment
3.
Connect ohmmeter across TPS terminals IDL and E2.
4.
Apply vacuum to throttle opener diaphragm.
5.
Insert a 0.024 in. (0.60 mm) feeler gauge between throttle stop screw and stop lever.
TPS Adjustment
6.
Gradually turn TPS clockwise until ohmmeter reading changes.
7.
Tighten TPS screws.
8.
Reinstall throttle body.