RAV4 4-Door 4WD L4-2.0L (3S-FE) (1997)
e. Turn the lever counterclockwise until it stops, then turn it clockwise 2 notches.
f.
Remove the control shaft lever.
g. Adjust the park/neutral position switch.
-
Align the groove and park/neutral basic line.
h. Tighten the 2 bolts.
Torque: 5.4 N.m (48 inch lbs.)
i.
Install the shift control lever with the nut.
Torque: 12.7 N.m (9 ft. lbs.)
j.
Connect the control cable with the nut.
5. Connect park/neutral position switch connector.
6. Install No.2 engine under cover.