T100 Pickup 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1993)
Start Injector Time Switch: Testing and Inspection
INSPECTION
1. Measure resistance of Cold Start Injector Time Switch.
^
Disconnect the connector.
^
Using an ohmmeter, measure the resistance between terminals.
Between terminals STA and STJ:
Below 10°C (50°F):
30 - 50 ohms
Above 25°C (77°F):
70 - 90 ohms
Between terminals STJ and ground:
Always: 30 - 90 ohms
2. If the resistance is not as specified, replace the Cold Start Injector Time Switch. Reconnect the connector.