Tacoma Extra Cab 2WD V6-3.4L (5VZ-FE) (1998)
/Page-413002.png)
b. Remove the 6 bolts and No.2 timing belt cover.
c. Disconnect the camshaft position sensor connector.
13. REMOVE FAN BRACKET
a. Remove the nut and PS pump adjusting strut.
b. Remove the bolt, nut, and fan bracket.
14. REMOVE CRANKSHAFT PULLEY
a. Using Special Service Tool (SST), loosen the pulley bolt.
SST 09213-54015 (90119-08216), 09330-00021
b. Remove the SST, pulley bolt and pulley.
HINT: If necessary, remove the pulley with SST and service bolt.
SST 09950-50010 (09551-05010, 09552-05010, 09553-05020, 09554-05030)