Outer Rear End Panel, (Lower), Partial Replacement
(Models F07, F08, F48, F67, F69)
There are special "left" and "right" side economy parts
available for partial replacement. Only work that deviates from the
operation "Lower Rear End Panel, Replace Completely" is
described.
Remove
Detach outer (lower) rear panel
(damaged side) according to size of new part:
1 separation cut approx. 165 mm over centre of vehicle to
left
|
2 separation cuts approx. 150 mm over centre of vehicle to the
right
|
|
|
Note size of new part!
Install
Butt weld new part to cutting point.
|