|
View from Below
| 1. |
Check bore, front frame side member |
| 2. |
Water drain, front floor |
| 3. |
Water drain hole, floor (rear) |
| 4. |
Check bore, rear frame (front) |
| 5. |
Check bore, rear frame (rear) |
|
|
Note: Points 4, 5 do
not apply to Models F35, F70.
1) Only applies to Model F69.
Measure
All reference points from centre of bore!
All dimensions in mm without tolerance. Tolerance: ± 2
mm.
|
