Inner Panelling - C-Pillar, Remove and Install
(Model F08)
Remove
Partially release upper B-pillar inner panelling – see
operation " Inner Panelling – Upper B-pillar, Remove and
Install (Model F08)" and partially release load compartment side
inner panelling – see operation " Side Inner Panelling
– Load Compartment, Remove and Install (Model F08)".
C-pillar inner panelling
Remove rear seat belt from underbody – see operation "Rear
Seat Belt, Remove and Install (Model F08)". Thread seat belt out of
C-pillar inner panelling.
|
|
Install
Thread belt into C pillar inner panelling, C pillar inner
panelling, rear seat belt to underbody – tightening torque 35
Nm / 26 lbf. ft. Load compartment side inner panelling, B-pillar
inner panelling.
|