|
Basic adjustment of both actuation cables –
see operation "Both Actuation Cables, Basic Adjustment (Models F08,
F35, F48, F69, F70)".
 Remove
Glass cover – see operation "Glass Cover, Remove and
Install (Models F08, F35, F48, F69, F70)". Drive – see
operation "Crank Drive, Remove and Install (Models F08, F35, F48,
F69, F70)" or "Electric Drive, Remove and Install (Models F08, F35,
F48, F69, F70)".
 Adjust
|
Push block guide assembly (1) forward until stopping (catch
lever engages in frontmost recess (2) of guide rail). Press front
guide towards back. Push rear guide (6) connecting pins flush with
adjusting notches (3) of side guide. Side guide bracket (4)
bypasses rear edge (5) of guide rail recess with slight offset of
0.2 to 0.5 mm.
|
|
Install
Install drive, glass cover.
Adjust
For crank drive – see operation "Crank Drive, Adjust
(Models F08, F35, F48, F69, F70)".
|
