|
Gasket for Differential Gear Cover, Replace
(F13/F13+/F17/F17+/F18)
 Remove
If present: Remove lower engine compartment cover – see
operation "Lower Engine Compartment Cover, Remove and Install" in
group "A".
|
Remove cover for differential (10 fastening bolts) – if
necessary release cover for differential by lightly tapping with
rubber hammer. Remove gasket for differential cover. Transmission
fluid escapes – place collecting pan underneath.
Install
Stick new seal with grease onto differential cover.
Attach differential cover to
transmission.
|
Tightening torque –
|
Sheet metal version:
|
F13/F13+/F17/F17+
|
30 Nm / 22 lbf. ft.
|
|
|
Light alloy version:
|
F13/F13+/F17/F17+
|
18 Nm / lbf. ft.
|
|
|
F18 Transmission 1)
|
|
18 Nm / lbf. ft. + 30°
|
|
|
Inspect
Correct level of transmission fluid – see operation
"Transmission Fluid Level, Check and Correct
(F13/F13+/F17/F17+/F18)".
Install
If present: Install lower engine compartment cover – see
operation "Lower Engine Compartment Cover, Remove and Install" in
group "A".
1 ) Insert fastening bolts with locking compound.
|
