|
Symptom Description: Selection problems
|
| |
Action
|
Additional information
|
|
1.
|
Read and carry out corresponding Field Remedies (TSB)
|
-
|
|
2.
|
Check clutch pedal movement
|
The clutch pedal must move down to the floor plate.
Ensure that no foot mat or similar is in the
area below the clutch pedal.
|
|
3.
|
Check/adjust remote gear selection
|
-
|
|
4.
|
Bleeding the hydraulic clutch actuation
|
-
|
|
5.
|
Check that clutch disengages
|
- Engine running at idle
- Press clutch
- Selector in neutral for around 10 seconds
- Engage 1st gear
If the vehicle jerks slightly, the clutch is not
disengaging properly.
|
|
6.
|
Remove transmission
|
-
|
|
7.
|
Check
|
- Are the correct parts fitted?
- Check clutch for damage
- Check grease on clutch hub, if necessary clean and grease
clutch plate hub and gear input shaft toothing
- Centring bushes present on engine, and not damaged or
loose?
- Check flywheel according to new ZMS damage diagnosis
|
