Parking Brake, Adjust
Adjust
1. |
For vehicles with drum brake: adjust drum brake
|
2. |
Remove cover of diagnostic connection
|
3. |
Unclip parking brake lever (2) from central console and lift
upwards
|
4. |
Release the adjusting nut (3) completely by turning it
backwards
|
5. |
Bring parking brake lever (1) to position "0" (released)
|
6. |
Depress brake pedal fully at least 5 times
Note: To adjust the
play on the parking brake at the brake calliper or brake drum -
ensure that each time the brake is activated, the brake pedal
returns to the original position (fully relieved of stress). In
vehicles with a drum brake the adjusting lever should no longer be
heard to jump beforehand.
|
7. |
Pull parking brake lever 5 times to the stop and release
again.
|
8. |
Pull on parking brake lever (1) to the 2nd notch
|
9. |
Turn adjusting nut on parking brake lever until the rear wheels
can only be turned with difficulty
Note: The braking
effect must be equal on both wheels.
|
10. |
Pull on parking brake lever to the 3rd notch
Note: The wheels must
be fixed at the 3rd notch.
|
|
|
11. |
Clip parking brake lever bellows to central console
|
12. |
Attach cover of diagnostic connection
|
|