|
Rear Electronics Module (REC), Replace L67
Note: When replacing
the control unit, before removing the control unit carry out a
"Reset" using TECH2.
 Remove
| 1. |
Open luggage compartment lid
|
| 3. |
Remove left side luggage compartment panelling 
|
|
| 4. |
Remove park pilot control unit (PAS)
| • |
Disconnect rear electronics module compact plug (1)
|
| • |
Release and disconnect 2 wiring harness plugs (3)
|
|
|
|
| 5. |
Remove rear electronics module
| • |
Release 6 wiring harness plugs (2) and disconnect
|
| • |
Remove rear electronics module
|
|
|
Install
| 6. |
Install rear electronics module
| • |
Insert rear electronics module
|
| • |
Connect and lock 6 wiring harness plugs
|
|
| 7. |
Install park pilot control unit (PAS)
| • |
Connect and lock 2x wiring harness plugs
|
| • |
Connect compact plug to rear electronics module
|
|
| 8. |
Install left side luggage compartment panelling
|
| 10. |
Program volatile memories
Note: When replacing
the control unit, before removing the control unit carry out a
"Reset" using TECH2.
|
|
