Callout
|
Component Name
|
Preliminary Procedures
Remove the instrument panel wiring harness. Refer to
Instrument Panel Wiring Harness Replacement .
|
1
|
Instrument Panel Tie Bar Fastener (Qty: 12)
Caution: Refer to
Fastener Caution .
Tighten
22 N·m (16 lb ft)
|
2
|
Heater and Air Conditioning Evaporator and Blower Module Fastener
(Qty: 3)
Tighten
5 N·m (44 lb in)
|
3
|
Instrument Panel Tie Bar
Procedure
|
1. |
Note location and routing of the I/P wiring
harness prior to removal of the I/P tie bar assembly to ensure
proper reinstallation. |
|
2. |
With the aid of an assistant, remove the I/P tie
bar assembly from the vehicle. |
|
3. |
If replacing the I/P tie bar assembly, transfer
all necessary components. |
|
