1
|
Center Pillar Upper Garnish Molding
Procedure
|
1. |
Remove the center pillar lower/upper garnish
molding assembly. |
|
2. |
Release the locking retainer on the rear side of
the center pillar upper garnish molding. |
|
3. |
Before installing the centre pillar upper garnish
moulding, move the seat belt guide adjuster to the lowest
position. |
|
4. |
Install the centre pillar lower/upper garnish
moulding assembly also with lowest adjusting position to the centre
pillar and seat belt guide adjuster. |
|
5. |
Check the seat belt guide adjustment in both
directions. |
• |
Lower direction: Seat belt guide adjuster must
lock into place and can only be unlocked with the releasing
device. |
• |
Upper direction: Continuously adjustable without
releasing device. |
|