Liftgate Adjustment (5-Door Wagon 35)
Callout
|
Component Name
|
1
|
Liftgate
Caution: Refer to
Fastener Caution .
Procedure
|
1. |
Loosen the liftgate hinge bolts (Qty: 4). |
|
2. |
Adjust the liftgate in order to obtain an even gap
on both sides between the liftgate and the quarter outer panel, the
rear bumper fascia and the roof and so that the liftgate is flush
with the quarter outer panel, the rear bumper fascia and the
roof. |
Adjustment
| • |
Liftgate to roof (a) 5.5 mm ± 2 mm (0.19 in
± 0.08 in) |
| • |
Liftgate to quarter outer panel (c) 4 mm ±
1 mm (0.16 in ± 0.04 in) |
| • |
Liftgate to rear bumper fascia (c) 4 mm ± 1
mm (0.16 in ± 0.04 in) |
Tighten
22 N·m (16 lb ft)
|
|
| |
|
