Vauxhall Workshop Service and Repair Manuals > Astra J > Diagnostic Navigation | Vehicle Diagnostic Information | Specifications | Digital Radio Receiver Scan Tool Information

Digital Radio Receiver Scan Tool Information

Table 1: Digital Audio Broadcast Scan Tool Parameters
Table 2: Digital Audio Broadcast Detection Module Output Controls

Parameter	Expected Value	Definition
Operating Conditions: Ignition ON
Antenna Signal Strength	Varies	The scan tool displays the Antenna Signal Strength in dBm.
End Model Part Number	Varies	The scan tool displays the End Model Part Number.
Base Model Part Number	Varies	The scan tool displays the Base Model Part Number.
End Model Part Number Alpha Code	Varies	The scan tool displays the End Model Part Number Alpha Code.
Diagnostic Data Identifier	Varies	The scan tool displays the Diagnostic Data Identifier.
Vehicle Identification Number (VIN)	Varies	The scan tool displays the Vehicle Identification Number (VIN).
Mechanical Key Code	Varies	The scan tool displays the Mechanical Key Code.
Module Diagnostic Address	Varies	The scan tool displays the Module Diagnostic Address.
Date Programmed	Varies	The scan tool displays the Date Programmed.

Scan Tool Output Control	Description
Audio Tone	This output controls a low test tone on left and right audio channels in order to check the audio between the Digital Audio Broadcast Module and the radio. Pressing left button a tone with 1 KHz can be heard out of the left speakers. Pressing right button a tone with 1 KHz can be heard out of the right speaker.
CAN Bus Configuration Learn	This output control will enable the module to learn the serial data speed and adapt to it.