Exhaust Gas Recirculation Vacuum Regulator Solenoid Valve
Replacement - EGR (1.7L Diesel LPL and LPV)
Removal Procedure
4. |
If equipped, open the front
compartment insulator service opening. |
5. |
Disconnect the exhaust gas
recirculation vacuum regulator solenoid valve wiring harness plug
(1). |
6. |
Remove the exhaust gas
recirculation vacuum regulator solenoid valve vacuum hoses (3) from
the solenoid valve (2). |
7. |
Remove the 2 exhaust gas
recirculation vacuum regulator solenoid valve bolts (3) from the
rubber mount (1). |
8. |
Remove the exhaust gas
recirculation vacuum regulator solenoid valve (2). |
Installation Procedure
1. |
Install the exhaust gas
recirculation vacuum regulator solenoid valve (2) to the rubber
mount (1). |
2. |
Install the 2 exhaust gas
recirculation vacuum regulator solenoid valve bolts (3) and tighten
to 10 N·m (89 lb in) . |
3. |
Connect the exhaust gas
recirculation vacuum regulator solenoid valve wiring harness plug
(1). |
4. |
Install the exhaust gas
recirculation vacuum regulator solenoid valve vacuum hoses (3) to
the solenoid valve (2). |
6. |
If equipped, close the front
compartment insulator service opening. |
|